Application Procedure Part 5

Rustop – RUSTOP is a blend of complex inorganic and organic rust removers and preventives, wetting agents along with water soluble resins etc in a suitable medium. The product converts existing rust on an iron, steel or any metal (copper, aluminum, brass or the like) surface to a film tightly bonded to the surface and which prevents further oxidation and subsequent formation of rust on the surfaces. The product is very much effective over a long period of time and the surface prepared by applying the product is readily available / suitable for applying paint coatings on the same.

 

Rust Coat is a Protective coating used in the industry to protect metal substrates from several adverse conditions including corrosion .It is having anti algae & anti moss effect also. All these properties of Rust Coat increases life of substrate.

Application Procedure:-

1. Clean the surface (surface has to be free from dust, oil Paints, grease & algae.)  

2. Apply uniform layer of Rustop with the help of cotton (Also apply where the joint is & overlapping is found)

3.  After that before dry, rub the surface with cotton and remove the rust.

4. After interval of 24 hrs – apply 2 coat of MX Rust Coat. (At 3-4 hrs intervals, depend upon atmosphere)

TIMBER KLEAN (TK)

TK is a water based milky clear solution acting as Tannin resistant and giving enormous dimension stability and waterproofing to the wood surface.

Components in TK react with the wood structure and makes absolute bonding giving the wood dimension stability.

It is highly recommended for furniture with white finish and wood that has to be painted with light colors for base preparation. TK is environment friendly and healthy for the labourers to work for.

Application Procedure :

1)      Prepare the surface with sanding with emery paper 220-320

2)      Make the surface smooth

3)      Flood spray the surface or do flooded application by cloth / brush by TK

4)      Let the substrate dry for 10-12 hours in normal season and 12-14 hours in humid season.

5)      DO NOT DO SANDING AFTER DRYING.

6)      Apply direct acrylic paint or distemper as required.

7)      Let the paint dry.

8)      Now do the sanding as per the requirement.

NOTE :

·         Flooded application required

·         Sanding is NOT to be done after TK application and drying

·         Sanding has to be done only after drying of distemper application.