Application Procedure Part 4

Application Procedure for Anti Corrosions

Description :-  

Mx Rustop is a blend of complex inorganic and organic chemicals to work as rust remover and preventer. The product converts existing rust into protective complex on an iron, steel or any metal (copper, aluminum, brass or the like) surface. Mx Rust EP is a Anti Rust Protective coating used in the industry to protect metal from severe adverse conditions including corrosion

Application Procedure:-

1. Clean the surface (surface has to be free from dust, oil Paints, grease & algae.) 

2. Apply uniform layer of Mx Rustop (Rust remover) with the help of cotton, Soft Cloth or by dipping, brushing or spraying on the surface (Also apply where the joint is & overlapping is found).

3.  After that before dry, rub the surface with cotton and remove the rust.

4. After interval of 24 hrs – apply LAC-RT (At 3-4 hrs intervals, depend upon atmosphere & Surface) with the help of Spray gun.

5.  After duration of drying of 12 hrs apply 1 coat of Mx Rust EP with brush & spray.

6. After Drying 1 coat, apply 2 coat of Mx Rust EP.

Application Procedure: For Paint on New Metal Sheet

1.   Clean the surface with cloth.

2.   Apply uniform layer of Rustop on the metal surface.

3.   Scrub and clean the rustop (when it is wet) surface with cloth.

4.   After complete drying of surface,

 apply black metal paint.

Application Procedure: For Paint 
on Old Metal Sheet (Maximum Rust)

1.   Clean the surface with cloth.

2.   Apply uniform layer of Rustop

 on the metal surface.

3.   Scrub and clean the rustop

 (when it is wet) surface with cloth/

 scotch bite.

4.   After complete drying of surface, 

apply rustop plus and then after scrub

 and clean the surface with cloth and 

scotch bite.

5.   At last after complete drying of 

metal surface, apply black paint.

Note: - When metal is new applying direct black paint.